2004 TL – Center Console Rear Section Removal/Installation Special Tools Required – KTC trim tool set SOJATP2014 NOTE: – Use the appropriate tool from the KTC trim tool set to avoid damage when prying components. – Take care not to scratch the front seat, dashboard, and related parts. 1. M/T: Lower the shift lever boot (A) to release the hooks (B) from the boot, then remove the shift knob (C). 2. Detach the clips (A, B), and release the hooks (C) by carefully inserting a trim tool between the HVAC panel and the center console trim (D) and prying gently on both sides 3. Open the console box lid (A) then remove the console mat (B) and screws (C, D) 4. Open the console box lid (A) then remove the console mat (B) and screws (C, D) 5. Lift up the rear of the console (A). Release the harness retainer clip (B) from the air duct, and disconnect the accessory power socket connector (C) and the light bulb socket connector (D), and then remove the rear section of the center console. 6. Install the console in the reverse order of removal, and replace any damaged clips.
Recent Searchhow to install starter in mini cooper - timing marks for 1998 volvo s70 - sensor for 2003 acura 3 2tl s type - how to do a body lift on a buick lesabre 2001 - head gasket 2007 chrysler sebring 3 5 v6 - 2003 acura tl vsa sensor - 2000 honda accord ex ball joints - how to completely replace belt x5 - 91 bmw 525i trouble codes - 2001 acura mdx middle console -